Mini Mow Rules

MINI MOW CLASS BUILD RULES

-AGES 6-12.

-RULES OF THE TRACK, PITS, GRID, DRIVER SAFETY EQUIPMENT, CODE OF CONDUCT AND POINTS WILL BE THE SAMES AS USLMRA.

FRAME BUILD MAY BE OF ROUND OR SQUARE TUBING FRAME WIDTH MAX WIDTH 12 INCHES. MUST BE STEEL, NO ALUMINUM. BODY/HOOD MUST BE FORMED LIKE A MOWER.

6:1 FINAL DRIVE RULE. NO EXCEPTIONS!!! I.E. 12T CLUTCH, 12T ON JACKSHAFT AND 72 AXLE SPROCKET. 1” INSPECTION HOLE AT CLUTCH DRUM.

ENGINE 6.5 HP 212 PREDATOR MOTOR MAX RPM 3650/MAX 22MPH. NO MODIFICATIONS WHATSOEVER OTHER THAN HEADER.

HEADER MUST POINT IN A DOWNWARD POSITION AWAY FROM DRIVER.

TIRES 12 INCH MAXIMUM HEIGHT MEASURED BY TECH GAUGE. NO TOLERANCE. MIN 5 INCH DIAMETER OR 6“ DIAMETER ALUMINUM RIMS.

SIDEWALL TO SIDEWALL MAX 40 WIDTH. NO TOLERANCE.

WHEELBASE MINIMUM 39 INCHES.

SIDE NERF BARS NO GREATER THAN 1 INCH PAST TIRE WIDTH.

STEERING ALL STEERING COMPONENTS MUST BE FASTENED SECURELY WITH NYLOCKS OR SAFETY PINS OR COTTER KEYS.

KILL SWITCH MUST BE OF JET SKI TYPE TETHER AS PER USLMRA SPECS.

BRAKES IN TACT AND WORKING SAFELY, FRONT BRAKES OPTIONAL.

EXHAUST ROUTED AWAY FROM DRIVER AND IF EXPOSED MUST HAVE HEADER WRAP.

CENTRIFUGAL CLUTCH ONLY. NO TORQUE CONVERTER. MUST HAVE METAL SHROUD PROTECTING DRIVER.